Post by Rock Spyder on Mar 18, 2005 8:15:14 GMT -6
Yeah I know name it after myself... But the name kind of fit it...
This started as a Hasbro, 1/6th Scale Military Willy's.
So Far the Body has been, Modified big time.
The Bed on the Body was Cut out and Raised 3/4's of an inch to accomodate the Chassis, The Fenders have been trimmed and Bobbed for the larger tires.
Custom links have been fabricated and are 6" long overall with Traxxas ballends. Custom Aluminum link Mounts where used to mount the shocks on the links, Black anodized Center Link Mounts Custom made, as well as a Black anodized Servo mount used in the front.
Traxxas Shocks currently on the project for set up, and may remain as they seem to be working perfectly.
The Chassis is a TXT-1 Chassis Custom Cut to fit the body and narrowed 1/2 inch with Custom Aluminum Square Body Mount Braces added front and rear.
The Hood was cut away from the Body and Special mounts will be made to allow the hood to be removed or opened gaining access to the Battery and radio Gear.
The Wheels and tires used are Clodbuster Tires custom Cut with 3/4's inch removed from both sides of the Front tire and just over 1 inch removed from the rear tires. The Rims are from Nova Racing.. and these are for Sale in the Buy Sell trade Section on RCMX...
The Rims are Maxx size and fitting the Clod Tires was fairly easy...
Electronics will consist of 1 3300 Integy Battery Pack, HiTech Servo 645mg, Futaba Radio Gear, ESC will be either a Super Rooster or an Intelispeed ESC..
Motors will be Mag Maheims with 11-13 tooth pinions have not decided..
A Roll Bar will be fabricated soon to mount on the body and chassis as well as possibly Nerf Bars...
Thanks
Tom
SpyderWebRC@hotmail.com
This started as a Hasbro, 1/6th Scale Military Willy's.
So Far the Body has been, Modified big time.
The Bed on the Body was Cut out and Raised 3/4's of an inch to accomodate the Chassis, The Fenders have been trimmed and Bobbed for the larger tires.
Custom links have been fabricated and are 6" long overall with Traxxas ballends. Custom Aluminum link Mounts where used to mount the shocks on the links, Black anodized Center Link Mounts Custom made, as well as a Black anodized Servo mount used in the front.
Traxxas Shocks currently on the project for set up, and may remain as they seem to be working perfectly.
The Chassis is a TXT-1 Chassis Custom Cut to fit the body and narrowed 1/2 inch with Custom Aluminum Square Body Mount Braces added front and rear.
The Hood was cut away from the Body and Special mounts will be made to allow the hood to be removed or opened gaining access to the Battery and radio Gear.
The Wheels and tires used are Clodbuster Tires custom Cut with 3/4's inch removed from both sides of the Front tire and just over 1 inch removed from the rear tires. The Rims are from Nova Racing.. and these are for Sale in the Buy Sell trade Section on RCMX...
The Rims are Maxx size and fitting the Clod Tires was fairly easy...
Electronics will consist of 1 3300 Integy Battery Pack, HiTech Servo 645mg, Futaba Radio Gear, ESC will be either a Super Rooster or an Intelispeed ESC..
Motors will be Mag Maheims with 11-13 tooth pinions have not decided..
A Roll Bar will be fabricated soon to mount on the body and chassis as well as possibly Nerf Bars...
Thanks
Tom
SpyderWebRC@hotmail.com