clod tuber suspetion

[CampRacing]

hey guys my clod likes to sway or roll like crazy do you think if I take the sway bars and the cantalevers off and run the shocks strate from the chassis to the 4-link that it will help with this?

thanks guys

[hcfr34]

According to cousingrandpa, loosing the cantelever setup helps. You could also try using swaybars.

[CampRacing]

I have sway bars on it now but it rolles over to easy also

[hcfr34]

It's hard to say without seeing it, and it would be mearly speculative on my part, cause I don't own one, but try this: 1 lower you cog(ie batteries mounted as low as poss...axle mount them, 2 Make sure your links are positioned properly (top links (side perspective) as low on the chassis and as high on the axle as possible....try to keep it level also. 3 Lower links: keep the mounting spot (on the chassis) as close to the upper link mounting spot as possible and below it, on the axle usually an1" to an11/2" verticle seperation is idea. They should also be placed further out on the axle itself. The upperlinks should be centrally located on top. Basically from a top view they should look like reverse a frames. 4 Try stiffer shocks, or different mounting points.
Or just give it to me and all your problems are solved.

[CampRacing]

here is the truck

I am going to try some diff thing this weekend it crawles great but I want to bash some to

or I will give it to you.You can have it for free but shipping is going to run you a seveal 100 dollars

[hcfr34]

LOL, good luck with it

[CampRacing]

thanks man