|
Post by gac1983 on Sept 17, 2004 23:36:15 GMT -6
Hey I thought I would try to do the pede trans on the o'l tmaxx trick... we will see how it turns out...G P.S. Let me know what you all think!!!!!
|
|
|
Post by jknapp4788 on Sept 18, 2004 16:55:24 GMT -6
Lots of driveshafts and joints there. Seems to me like the stock Stinger is going to have a lot of trouble moving that. Then again I am probably wrong.......It looks cool anyway
|
|
|
Post by gac1983 on Sept 18, 2004 22:09:06 GMT -6
Ok I got it all together today and this thing is sweet! Its so quiet, and it has some speed to it. I love how it turned out, I would make another in a heartbeat....I wasnt sure that the outdrives on the tranny would hold up with how you have to atatch them to the tmaxx drivelines but it worked great......oh ya and the stinger did great.....wonder what a 13 turn will do? hmmm better wait for the metal gear set... lol...Gord
|
|
|
Post by Rock Spyder on Sept 18, 2004 22:41:26 GMT -6
Now its time for Brushless....LOL
Good job gordy way to go Tom
|
|
|
Post by gac1983 on Sept 18, 2004 22:51:46 GMT -6
Heres what it looked like when I ran it...I love this thing!! LOL...Gord
|
|
|
Post by Rock Spyder on Sept 18, 2004 22:57:24 GMT -6
Good job
Looks great Tom
|
|
thespencer
RCMX Test Driver!
i love rocks!
Posts: 42
|
Post by thespencer on Sept 19, 2004 16:21:02 GMT -6
i dont see what the advantages to this would be? you lose one motor (and if you wanted one motor you could just not use one) and you lose the two speed. Plus it seems like the stock pede motor would be ver underpowered in this truck because of its size and weight compared to the pedes. anyway how did you get the pede shafts to bolt to the maxx axles?
|
|
|
Post by gac1983 on Sept 19, 2004 16:57:26 GMT -6
i used tmaxx drivelines and made them hook up to the pede trans and for crawling you dont need the high gear you just adjust the gearing and leave it...and as far as size an weight its a bare aluminum chasis and the emaxx trans is alot heavier.......it work great!!!...G
|
|
thespencer
RCMX Test Driver!
i love rocks!
Posts: 42
|
Post by thespencer on Sept 20, 2004 15:40:04 GMT -6
oh didnt know you had planed to crawl with it. anyplans to make the maxx straight axle? or perhaps a gear reduction for the pede tranny?
|
|
|
Post by gac1983 on Sept 20, 2004 21:55:03 GMT -6
All in the works or I might just trade it out for another truck...I locked the diff in the pede trans today it works great....Gord
|
|
|
Post by usa1man on Sept 20, 2004 22:39:55 GMT -6
hey looks good i am not much of a tmaxx fan either but i think i could handel it being electric also how much run time do you get with it
|
|
|
Post by gac1983 on Sept 21, 2004 0:26:02 GMT -6
hmmm about 17 min with a new 1500.....or so...Gord
|
|
|
Post by usa1man on Sept 23, 2004 0:42:10 GMT -6
so its not too bad does it crawl good and how did you mount the tmaxx half shafts to the gear box i have tried to do it 2 make my stampede more stronger but no luck
|
|
|
Post by gac1983 on Sept 23, 2004 15:52:21 GMT -6
had to do some drilling and latheing on the drive lines and out puts
|
|